International Electrotechnical Commission

Household and similar electrical appliances – Safety – Part 2-110: Particular requirements for commercial microwave appliances with insertion or contacting applicators - Edition 1.0
 N 60335-2-110

Annotation

This clause of Part 1 is replaced by the following.

This International Standard deals with the safety of microwave appliances intended for commercial use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances.

In general, this standard does not take into account

– persons (including children) whose

- physical, sensory or mental capabilities; or

- lack of experience and knowledge

prevents them from using the appliance safely without supervision or instruction;

– children playing with the appliance.

Appliances covered by this standard incorporate an open-ended applicator (as example an overview is given in Figure 103) for treatment of the load. They are divided into three types:

– with insertion applicator, typically for moisture removal by insertion into holes in floors, walls or ceilings (an example is given in Figure 106);

– with large area contacting applicator, typically for drying of floors, walls or ceilings (examples are given in Figure 104 and Figure 105);

– with small area contacting applicator, typically for paint removal and spot-heating (an example is given in Figure 107).