Deutsches Institut fur Normung e. V.

Calculation of tanks and apparatus made of thermoplastics - Vertical round, nonpressurised tanks
 N DVS 2205-2

Annotation

The following structure and calculation rules apply to vertical, cylindrical, factory-fabricated fl at base tanks made of thermoplastics, in particular

• Polyvinyl chloride (PVC),

• Polypropylene (PP),

• Polyethylene (PE),

• Polyvinylidene fl uoride (PVDF).

The cylindrical casing with constant wall thickness or graduated wall thickness can be welded from panels, or consists of a spiral wound pipe or an extruded pipe. In addition to the hydrostatic loads, short and long-term pressures must be taken into consideration. The following minimum values have been determined:

Positive pressure: 0.0005 N/mm 2 (0.005 bar)

Negative pressure: 0.0003 N/mm 2 (0.003 bar)

The long-term pressures should only be applied if they can actually take eff ect.

Restriction of the main dimensions:

Tank diameter: d ? 4 m

Ratio: h/d ? 6 Minimum thickness: s = 4 mm

Responsibilities with regard to specifi c fi elds of law (for example building law, water law, Occupational Health and Safety Law, etc.) must be taken into account.

Автоматический перевод: