GMW GMW14120 Polypropylene – Natural Fiber Filled, Heat Stabilized - Issue 3; English
Данный раздел/документ содержится в продуктах:
- Техэксперт: Машиностроительный комплекс
- Картотека зарубежных и международных стандартов
- ISO 13274 Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs - First Edition
- 13
- ISO 13274 Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs - First Edition
- 13.300
- ISO 13274 Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs - First Edition
- 55
- ISO 13274 Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs - First Edition
- 55.020
- ISO 13274 Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs - First Edition
- DIN EN 13476-3 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
- DIN EN 1979 Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam; German version EN 1979:1999
- DIN EN 16506 Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL)
- DIN EN 1979 Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam; German version EN 1979:1999
- DIN EN 1979 Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam; German version EN 1979:1999
- DIN EN 16506 Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL)
- DIN EN 16506 Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL)
- ISO 1133-1 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume flow rate (MVR) of thermoplastics — Part 1: Standard method - First Edition
- CEN EN ISO 19069-1 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications
- ISO 1873-2 Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties - Third Edition
- Картотека зарубежных и международных стандартов
General Motors Company
Polypropylene – Natural Fiber Filled, Heat Stabilized - Issue 3; English
N GMW14120
Annotation
Material Description. This specification describes the properties of natural fiber filled, heat stabilized polypropylene, which are used in injected or extruded form for molded components.
Symbols. . The material abbreviations according to ISO 11469 are shown in Table 1.
Applicability. Typical applications include door trim carrier.
Remarks. The classification into groups is according to the different ranges of natural fiber content
Автоматический перевод:
Полипропилен – натуральное заполненное волокно, устойчивое тепло - выходят 3; английский язык
Материальное Описание. Эта спецификация описывает свойства натурального заполненного волокна, тепло стабилизировало полипропилен, которые используются во введенной или вытесненной форме для формируемых компонентов.
Символы.. Существенные сокращения согласно ISO 11469 показывают в Таблице 1.
Применимость. Типичные применения включают перевозчика дверного наличника.
Замечания. Классификация в группы согласно различным диапазонам естественного содержания волокна
