Deutsches Institut fur Normung e. V.

Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016)
 N EN ISO 4624

Annotation

This International Standard specifies three methods (i.e. one dolly or two dollies on a painted panel and two dollies, one as painted substrate) for determining the adhesion by carrying out a pull-off test on a single coating or a multi-coat system of paint, varnish or related product.

These test methods have been found useful in comparing the adhesion behaviour of different coatings. It is most useful in providing relative ratings for a series of coated panels exhibiting significant differences in adhesion.

The test may be applied using a wide range of substrates. Different procedures are given according to whether the substrate is deformable, for example thin metal, plastics and wood, or rigid, for example thick concrete and metal plates. To avoid distortion of the substrate during the tensile test, it is common to use a sandwich construction. For example, for special purposes, the coating may be applied directly to the face of a test dolly.

Автоматический перевод:

Краски и лаки - Оттяжной держатель проверяют на прилипание (ISO 4624:2016)

Этот Международный стандарт указывает три метода (т.е. одна куколка или две куколки на нарисованной панели и две куколки, один как окрашенная подложка) для определения адгезии путем выполнения получения по запросу - от теста на единственном покрытии или системе мультислоя краски, лака или сопутствующего товара.