IEC 60918 PVC Insulated Ribbon Cable with a Pitch of 1,27 mm Suitable for Insulation Displacement Termination - Edition 1.0; Includes Amendment 1: 06/1992
Данный раздел/документ содержится в продуктах:
- Техэксперт: Машиностроительный комплекс
- Картотека зарубежных и международных стандартов
- IEC 60918 PVC Insulated Ribbon Cable with a Pitch of 1,27 mm Suitable for Insulation Displacement Termination - Edition 1.0; Includes Amendment 1: 06/1992
- 29
- IEC 60918 PVC Insulated Ribbon Cable with a Pitch of 1,27 mm Suitable for Insulation Displacement Termination - Edition 1.0; Includes Amendment 1: 06/1992
- 29.060
- IEC 60918 PVC Insulated Ribbon Cable with a Pitch of 1,27 mm Suitable for Insulation Displacement Termination - Edition 1.0; Includes Amendment 1: 06/1992
- 29.060.20
- CEI EN 60947-1 Low-voltage switchgear and controlgear - Part 1: General rules - Fifth Edition
- IEC 60344 CORR 1 Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires – Application guide - Edition 3.0
- BSI BS EN 60999-1 Connecting Devices - Electrical Copper Conductors - Saftey Requirements for Screw-Type and Screwless-Type Clamping Units - Part 1:General Requirements and Particular Requirements for Clamping Units for Conductors from 0,2 mm2 up to 35 mm2 (Included)
- IEC 60344 CORR 1 Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires – Application guide - Edition 3.0
- IEC 60344 CORR 1 Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires – Application guide - Edition 3.0
- BSI BS EN 60999-1 Connecting Devices - Electrical Copper Conductors - Saftey Requirements for Screw-Type and Screwless-Type Clamping Units - Part 1:General Requirements and Particular Requirements for Clamping Units for Conductors from 0,2 mm2 up to 35 mm2 (Included)
- BSI BS EN 60999-1 Connecting Devices - Electrical Copper Conductors - Saftey Requirements for Screw-Type and Screwless-Type Clamping Units - Part 1:General Requirements and Particular Requirements for Clamping Units for Conductors from 0,2 mm2 up to 35 mm2 (Included)
- BSI BS EN 50521 + A1 Connectors for photovoltaic systems - Safety requirements and tests - AMD: September 30, 2012
- BSI BS EN 60352-3 Solderless Connections Part 3: Solderless Accessible Insulation Displacement Connections - General Requirements, Test Methods and Practical Guidance
- BSI BS EN 60352-4 Solderless Connections Part 4: Solderless Non- Accessible Displacement Connections - General Requirements, Test Methods and Practical Guidance - AMD 13095: November 16, 2001
- Картотека зарубежных и международных стандартов
International Electrotechnical Commission
PVC Insulated Ribbon Cable with a Pitch of 1,27 mm Suitable for Insulation Displacement Termination - Edition 1.0; Includes Amendment 1: 06/1992
N 60918
Annotation
This standard is applicable to PVC insulated ribbon cable with a pitch of 1.27 mm and with a maximum of 64 conductors suitable for the insulation displacement (ID) method of termination.
The cable is regarded as suitable for continuous operation at conductor temperatures from -10°C to 90°C. Alternatively the cable may be used at higher temperatures not exceeding 105°C for periods to be agreed between the customer the customer and manufacturer.
Автоматический перевод:
PVC Изолированный Ленточный кабель с Подачей 1,27 мм, Подходящих для Завершения Смещения Изоляции - Издание 1.0; Включает Поправку 1: 06/1992
Этот стандарт применим к изолированному ленточному кабелю PVC с подачей 1.27 мм и максимум с 64 проводников, подходящих для метода смещения изоляции (ID) завершения.
Кабель рассматривается как подходящий для непрерывной работы при проводниковых температурах от-10°C до 90°C. Альтернативно кабель может использоваться при более высоких температурах, не превышающих 105°C в течение периодов, которые будут согласованы между клиентом клиент и производителем.
