European Committee for Standardization

Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
 N EN ISO 14577-1

Annotation

This part of ISO 14577 specifies the method of instrumented indentation test for determination of hardness and other materials parameters for the following three ranges:

— macro range: 2 N < F < 30 kN;

— micro ranp: 2 N > F; h> 0,2 ?m;

— nano range: h < 0,2 ?m.

For the nano range,the mechanical deformation strongly depends on the real shape of indentertip andthe calculated material parameters are significantly influenced by the contact area function of the indenter used in the testing machine. Therefore, careful calibration of both instrument and indenter shape is required in order to achieve an acceptable reproducibility of the materials parameters determined with different machines.

The macro and micro ranges are distinguished by the test forces in relation to the indentation depth.

Attention is drawn to the fact that the micro range has an upper limit given by the test force (2 N) and a lower limit given by the indentation depth of 0,2 ?m.

The determination of hardness and other material parameters is given in Annex A,

At high contact pressures, damage to the indenter is possible. For this reason in the macro range, hardmetai indenters are often used. For test pieces with very high hardness and modulus of elasticity, permanent indenter deformation can occur and can be detected using suitable reference materials. It is necessary that its influence on the test result be taken into account.