CSA Standards

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines - First Edition
 N CAN/CSA-C22.2 NO. 62841-3-10:16

Annotation

This clause of Part 1 is applicable, except as follows:

Addition:

This part of IEC 62841 applies to transportable cut-off machines intended to cut materials such as metals, concrete and masonry and to be fitted with one abrasive

– bonded reinforced wheel of Type 41, or

– diamond cut-off wheel with the peripheral gaps, if any, not exceeding 10 mm

and with

– a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s with the maximum wheel diameter and

– a wheel diameter range of 250 mm to 410 mm.

This standard does not apply to:

– transportable mitre saws;

– transportable tile saws;

– transportable metal saws.

NOTE 101 Transportable mitre saws are covered by IEC 62841-3-9. Transportable tile saws will be covered by a future part of IEC 62841-3. Transportable metal saws will be covered by a future part of IEC 62841-3.

Автоматический перевод: