ASTM International

Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
 N A307

Annotation

This specification2 covers the chemical and mechanical requirements of two grades of carbon steel bolts and studs in sizes 1 4 in. through 4 in. The fasteners are designated by "Grade" denoting tensile strength and intended use.

This specification does not cover requirements for machine screws, thread cutting/forming screws, mechanical expansion anchors or similar externally threaded fasteners.

Suitable nuts are covered in Specification A563. Unless otherwise specified, the grade and style of nut for each grade of fastener, of all surface finishes.

The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

Supplementary Requirement S1 of an optional nature is provided, which describes additional restrictions to be applied when bolts are to be welded. It shall apply only when specified in the inquiry, order, and contract.

Terms used in this specification are defined in Terminology F1789 unless otherwise defined herein.

2 For ASME Boiler and Pressure Vessel Code applications see related Specification SA-307 in Section II of that Code.

*A Summary of Changes section appears at the end of this standard

Автоматический перевод: