Deutsches Institut fur Normung e. V.

Timber structures - Cross laminated timber - Requirements
 N EN 16351

Annotation

This European Standard sets out provisions regarding the performance characteristics for straight and curved structural cross laminated timber (X-Lam) both without and with large finger joints as a material for the manufacture of structural elements to be used in buildings and bridges.

This European Standard applies to cross laminated timber:

— to be used in service class 1 or 2 according to EN 1995-1-1;

— made of coniferous species and poplar listed in 5.1.5 of this standard;

— built up of at least three orthogonally bonded layers (at least two of them timber layers);

— having, depending on the number of layers, adjacent layers which may be bonded parallel to the grain;

— made of timber layers which are made of strength graded timber according to EN 14081-1;

— made of timber layers having thicknesses between 6 mm and 60 mm (including) taking into account the layup requirements given in this European standard;

— made of timber layers which may be edge bonded or which are not bonded and have spacing less than 6 mm between adjacent laminations;

— which may comprise wood based panel layers made of structural wood based panels specified in this European standard, fulfilling the requirements for use in service class 2 or 3 according to EN 1995-1-1, having no structural joints between the single panels and having thicknesses between 6 mm and 45 mm (including);

— bonded with adhesives, fulfilling the requirements given in this European standard;