Canadian General Standards Board

Textile test methods Elongation
 N CAN/CGSB-4.2 NO. 10-M87

Annotation

PURPOSE AND SCOPE

This method determines the elongation of fabrics, yarns, threads and cords between two limits of force on a tensile testing machine.

The elongation of a specimen between any two forces is determined from the measurement, at each of these forces, of the distance between two reference marks on the specimen.

The difference in clamp-separation between two specified forces is commonly used as a measure of elongation, but such values will be greater than the true elongation if there is flow of the specimen out of the proximal edges of the clamps as the force increases. Where the amount of flow-out from jaw-type clamps is small in proportion to the true elongation, it is frequently ignored, and the elongation value obtained by measurement of clamp-separation in such cases is deSignated "apparent elongation". Where the flow-out is relatively large, its approximate amount at the specified forces may be measured and applied as a correction (Note 1). The separation of drum-type clamps cannot be used for the determination of specimen elongation and reference marks must be placed on the specimen.

Автоматический перевод:

Тканевое Удлинение методов испытаний

ЦЕЛЬ И ОБЪЕМ

Этот метод определяет удлинение тканей, пряжи, нитей и шнуров между двумя пределами силы на динамометре.