ASTM International

Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments
 N F914/F914M

Annotation

This test method describes a procedure for nondestructive testing using acoustic emission (AE) testing for aerial personnel devices, which do not have a supplemental load handling attachment.

Equipment Covered—This test method covers the following types of vehicle-mounted insulated aerial personnel devices:

Extensible boom aerial personnel devices,

Articulating boom aerial personnel devices, and

Any combination of 1.1.1.1 and 1.1.1.2.

Equipment Not Covered—This test method does not cover any of the following equipment:

Material-handling aerial devices,

Digger-derricks with platform, and

Cranes with platform.

The AE test method is used to detect and area-locate emission sources. Verification of emission sources may require the use of other nondestructive test (NDT) methods, such as radiography, ultrasonics, magnetic particle, liquid penetrant, and visual inspection. Warning—This test method requires that external loads be applied to the superstructure of the vehicle under test. During the test, caution must be taken to safeguard personnel and equipment against unexpected failure or instability of the vehicle or components.

NOTE 1—This test method is not intended to be a stand alone NDT method for the verification of the structural integrity of an aerial device. Other NDT methods should be used to supplement the results.